Order a hot dipped galvanized drive anchor for fastening wood to concrete from Midwest Perma-Column. It is a 3/16 x 2-1/2-inch flathead priced at $0.42 each.
Drill a pilot hole with a 3/16 masonry bit, then drive the anchor. Midwest Perma-Column has made precast concrete columns in Edwards, Illinois since 2004, and this anchor is part of its Perma-Column hardware.
Showing the single result

Grab the 3/16 x 2-1/2-inch anchor and you are set. There is no sizing chart to decode, just one galvanized anchor for $0.42.
Need another size? Call 800-798-5562 and the team will help you find the right fit for your connection.
The PC2-5DAGS drive anchor is a flathead anchor with a hot dipped galvanized finish. Each piece weighs 0.40 lbs, and you set the quantity that matches your job.
| Spec | Detail |
| Model | PC2-5DAGS galvanized drive anchor |
| Size | 3/16 x 2-1/2 inches |
| Head | Flat head |
| Finish | Hot dipped galvanized |
| Pilot hole | 3/16 masonry bit |
| Price | $0.42 each |
| Unit weight | 0.40 lbs |
| Install guide | Drive Anchor Installation Guide, downloadable from the product page |
Hot dipped galvanizing coats the steel in zinc, which slows rust where wood and concrete meet. That protection matters at the base of a building, where moisture collects.
Order a handful for a repair or enough to finish a full build.
Ask about your drive anchor count
Three steps set the anchor:
The Drive Anchor Installation Guide on the drive anchor product page shows the full process.

Drive anchors sit at the wood-to-concrete joint. Round out your cart with the categories around that joint:
Two steps get anchors on the way:
Questions before you buy? Call 800-798-5562, Monday through Friday, 7:00 am to 3:30 pm CST.
More installation documents sit in the product manuals library.
Add the anchor to your cart and pay by credit card. Questions go to the team at 800-798-5562, Monday through Friday.